EPI - Master-Touch™ Series 9200MP HAZ FAT Remote Insertion Thermal Mass Flow Meter
Manufacturer: Eldridge Products - EPI
Mfg Product Code: 9260MP-REM-SSS-133-AC115-MW075-L32RT0-1RC-AIR-CT2-MB
Weight: 0.01 lb(s)
[9260MP] Flow Averaging Tube - Hazardous Area Insertion Style Flow Meter - 3/4" OD Probe
[REM] Remote Electronics for use in Ordinary Locations ONLY - Class 2252-03 & 2252-83 for Process Control Equipment: Standard two analog signal (4-20mA and 0-5VDC flow & temperature) and one digital output (RS485 Modbus RTU). OPTIONAL DIGITAL OUTPUTS: HART, BACnet, or Profibus
[SSS] 16L stainless steel thermowells - 50Ω reference grade platinum winding on ceramic rod with dielectric glass coating bonded by epoxy buffer.
[133] 2-line backlit Liquid Crystal Transflective Display - excellent low light and high light readability; 4-button programmable key pad; OUTPUT: Flow, Total Flow, % of Full Scale, Temperature, Raw mW Coolin
[AC115] 115 VAC 50/60 Hz
[MW075] Gas Temperature Range: Ambient to 75°C/167°F
[L32RT0] FAT Length = 32 inches ; FAT Return = 0
[1RC] 1 Gas Range
[AIR] AIR calibration against our certified 0.05% accurate Primary Standard that is directly traceable to NIST. Enhanced accuracy calibration is always optional
[CT2] CSA/CUS T2 (300°C) Approved Instrument for Flow Element/Flow Transmitter (FE/FT or FIT with display); Approved for remote electronics (FIT or FT) only with remote ACEX or DCEX feature; For use in hazardous area locations; Class I Division 1, Group B, C, D; Class II Group E, F, G; Class III; Enclosure Type 4X; Class I Zone I; AEx d IIB+H2 IP66; Ex d IIB+H2 IP66; T2; Ta = 0°C to 50°C
[MB] RS485 Modbus RTU - Read & Write
EPI - Master-Touch™ Series 9200MP HAZ FAT Remote Insertion Thermal Mass Flow Meter
[9260MP] Flow Averaging Tube - Hazardous Area Insertion Style Flow Meter - 3/4" OD Probe
[REM] Remote Electronics for use in Ordinary Locations ONLY - Class 2252-03 & 2252-83 for Process Control Equipment: Standard two analog signal (4-20mA and 0-5VDC flow & temperature) and one digital output (RS485 Modbus RTU). OPTIONAL DIGITAL OUTPUTS: HART, BACnet, or Profibus
[SSS] 16L stainless steel thermowells - 50Ω reference grade platinum winding on ceramic rod with dielectric glass coating bonded by epoxy buffer.
[133] 2-line backlit Liquid Crystal Transflective Display - excellent low light and high light readability; 4-button programmable key pad; OUTPUT: Flow, Total Flow, % of Full Scale, Temperature, Raw mW Coolin
[AC115] 115 VAC 50/60 Hz
[MW075] Gas Temperature Range: Ambient to 75°C/167°F
[L32RT0] FAT Length = 32 inches ; FAT Return = 0
[1RC] 1 Gas Range
[AIR] AIR calibration against our certified 0.05% accurate Primary Standard that is directly traceable to NIST. Enhanced accuracy calibration is always optional
[CT2] CSA/CUS T2 (300°C) Approved Instrument for Flow Element/Flow Transmitter (FE/FT or FIT with display); Approved for remote electronics (FIT or FT) only with remote ACEX or DCEX feature; For use in hazardous area locations; Class I Division 1, Group B, C, D; Class II Group E, F, G; Class III; Enclosure Type 4X; Class I Zone I; AEx d IIB+H2 IP66; Ex d IIB+H2 IP66; T2; Ta = 0°C to 50°C
[MB] RS485 Modbus RTU - Read & Write