EPI - 8240MP Series Insertion Style Flow Meter
Manufacturer: Eldridge Products - EPI
Mfg Product Code: 8240MP-ATEX-SSS-133-AC115-MW050-4018NA-1RC-AIR-CT2-MB-CBL5-BVR0812T-TAG
Weight: 0.01 lb(s)
[8240MP] - Hazardous Area Insertion Style Flow Meter - 1/2" OD Probe
[ATEX] - Remote Electronics non-incendive and explosion proof enclosure for AC input power for use in Hazardous Locations - standard outputs: 4-20mA or 0-5VDC (flow and temperature), RS485 Modbus RTU. Comes with 2" pipe mounting bracket
assembly
[SSS] - 316L stainless steel thermal wells - 50Ω reference grade platinum winding on ceramic rod with dielectric glass coating bonded by epoxy buffer
[133] - line backlit Liquid Crystal Transflective Display - excellent low light and high light readability; 4-button programmable key-pad; OUTPUT: Flow, Total Flow, % of Full Scale, Temperature, Raw mW Cooling
[AC115] - 115 VAC 50/60 Hz
[MW075] - Gas Temperature Range: Ambient to 50°C/122°F
[4018NA] - 1/2" OD x 18" Probe
[1RC] - 1 Gas Range
[AIR] - AIR calibration against our certified 0.05% accurate Primary Standard that is directly traceable to NIST. Enhanced accuracy calibration is always optional.
[CT2] - CT2: CSA/CUS T2 (300°C) Approved Instrument for Flow Element/Flow Transmitter (FE/FT or FIT with display); Approved for remote electronics (FIT or FT) only with remote ACEX or DCEX feature; For use in hazardous area locations; Class I Division 1, Group B, C, D; Class II Group E, F, G; Class III; Enclosure Type 4X; Class I Zone I; AEx d IIB+H2 IP66; Ex d IIB+H2 IP66; T2; Ta = 0°C to 50°C
[MB/HT] - RS485 Modbus RTU & HART communications module
[CBL5] - 5-wire interconnecting cable - LENGTH = 45 FEET
[BVR0812T] - Ball Valve Retractor Assembly with Locking Collars and Cable Restraint; 1/2" probe bore/seal x 1" NPT x 10" Long. Requires minimum 18 inch long probe. Operating Pressure 250 PSI. Recommended pressure during probe removal <125 PSI
[TAG] SS Identification Tag
EPI - 8240MP Series Insertion Style Flow Meter
[8240MP] - Hazardous Area Insertion Style Flow Meter - 1/2" OD Probe
[ATEX] - Remote Electronics non-incendive and explosion proof enclosure for AC input power for use in Hazardous Locations - standard outputs: 4-20mA or 0-5VDC (flow and temperature), RS485 Modbus RTU. Comes with 2" pipe mounting bracket
assembly
[SSS] - 316L stainless steel thermal wells - 50Ω reference grade platinum winding on ceramic rod with dielectric glass coating bonded by epoxy buffer
[133] - line backlit Liquid Crystal Transflective Display - excellent low light and high light readability; 4-button programmable key-pad; OUTPUT: Flow, Total Flow, % of Full Scale, Temperature, Raw mW Cooling
[AC115] - 115 VAC 50/60 Hz
[MW075] - Gas Temperature Range: Ambient to 50°C/122°F
[4018NA] - 1/2" OD x 18" Probe
[1RC] - 1 Gas Range
[AIR] - AIR calibration against our certified 0.05% accurate Primary Standard that is directly traceable to NIST. Enhanced accuracy calibration is always optional.
[CT2] - CT2: CSA/CUS T2 (300°C) Approved Instrument for Flow Element/Flow Transmitter (FE/FT or FIT with display); Approved for remote electronics (FIT or FT) only with remote ACEX or DCEX feature; For use in hazardous area locations; Class I Division 1, Group B, C, D; Class II Group E, F, G; Class III; Enclosure Type 4X; Class I Zone I; AEx d IIB+H2 IP66; Ex d IIB+H2 IP66; T2; Ta = 0°C to 50°C
[MB/HT] - RS485 Modbus RTU & HART communications module
[CBL5] - 5-wire interconnecting cable - LENGTH = 45 FEET
[BVR0812T] - Ball Valve Retractor Assembly with Locking Collars and Cable Restraint; 1/2" probe bore/seal x 1" NPT x 10" Long. Requires minimum 18 inch long probe. Operating Pressure 250 PSI. Recommended pressure during probe removal <125 PSI
[TAG] SS Identification Tag