0-5 Volt, S18UUAQ-78863
S18UUAQ-78863 0-5 VOLT
Brand_Name:Banner
Min Operating Temperature:-20 °C, -20 °C
Max Operating Temperature:60 °C
Power/Current Consumption (exclusive of load):65 mA max; 40 mA @ 25 V dc
Temperature Warm-up Drift upon Power-up:Temp. compensation enabled, < 1.0% of the sensing distance upon power-up.
Power Supply:12-30 VDC
Temperature Effect (mm/°C):0.02% of sensing distance/°C
Delay at Power-Up:300 ms
Ingress Protection:IP67
Sensing Beam:Ultrasonic
Housing Style:Barrel - Straight
Max Sensing Distance:300 mm
Sensing Mode (Detailed):Time of Flight
Sensing Mode (General):Proximity
Device Type:Sensor
Feature: RS-232:No
Feature: RS-485:No
RS-422:No
Feature: IO Link:No
Feature: Wireless:No
Feature: Quick Disconnect:Yes
Quick Disconnect Type:M12 (Euro)
Max Op. Relative NC Humidity:100%
Feature: Chemical Resistant:No
Number of Pins:5
Adjustments:Push Button; Remote Teach
Feature: Timing (Hold/Delay):No
Barrel Diameter:18
Min Response Time:2.5 ms
Feature: Ultrasonic:Yes
Mechanical Shock:IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Min Window Size:5 mm
Remote Teach and Laser Control Input Impedence:12 kΩ
Discrete (Switched) Outputs:Bipolar (NPN & PNP)
Max Measurement Range:100-500 mm
Output Protection:Protected against short circuit conditions
SSI:No
Profibus:No
Analog Voltage Output Rating:2.5 kΩ min. load impedance
Supply Protection Circuitry:Protected against reverse polarity and transient overvoltages
Temp. Warm-up Drift (Notes 2):After 60 min, the apparent switchpoint is < 0.3% of the actual position.
Connection:Integral QD
Country of Origin:US
NEMA / UL:NEMA 6P, NEMA 6P
Feature: Common Ethernet Protocol:No
Feature: PC Configurable:No
Indicator Type:LED
Warm-Up Time:10 min
Ultrasonic Frequency:300 kHz
Specifications
| Brand_Name | Banner |
| Min Operating Temperature | -20 °C, -20 °C |
| Max Operating Temperature | 60 °C |
| Power/Current Consumption (exclusive of load) | 65 mA max; 40 mA @ 25 V dc |
| Temperature Warm-up Drift upon Power-up | Temp. compensation enabled, < 1.0% of the sensing distance upon power-up. |
| Power Supply | 12-30 VDC |
| Temperature Effect (mm/°C) | 0.02% of sensing distance/°C |
| Delay at Power-Up | 300 ms |
| Ingress Protection | IP67 |
| Sensing Beam | Ultrasonic |
| Housing Style | Barrel - Straight |
| Max Sensing Distance | 300 mm |
| Sensing Mode (Detailed) | Time of Flight |
| Sensing Mode (General) | Proximity |
| Device Type | Sensor |
| Feature: RS-232 | No |
| Feature: RS-485 | No |
| RS-422 | No |
| Feature: IO Link | No |
| Feature: Wireless | No |
| Feature: Quick Disconnect | Yes |
| Quick Disconnect Type | M12 (Euro) |
| Max Op. Relative NC Humidity | 100% |
| Feature: Chemical Resistant | No |
| Number of Pins | 5 |
| Adjustments | Push Button; Remote Teach |
| Feature: Timing (Hold/Delay) | No |
| Barrel Diameter | 18 |
| Min Response Time | 2.5 ms |
| Feature: Ultrasonic | Yes |
| Mechanical Shock | IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave |
| Min Window Size | 5 mm |
| Remote Teach and Laser Control Input Impedence | 12 kΩ |
| Discrete (Switched) Outputs | Bipolar (NPN & PNP) |
| Max Measurement Range | 100-500 mm |
| Output Protection | Protected against short circuit conditions |
| SSI | No |
| Profibus | No |
| Analog Voltage Output Rating | 2.5 kΩ min. load impedance |
| Supply Protection Circuitry | Protected against reverse polarity and transient overvoltages |
| Temp. Warm-up Drift (Notes 2) | After 60 min, the apparent switchpoint is < 0.3% of the actual position. |
| Connection | Integral QD |
| Country of Origin | US |
| NEMA / UL | NEMA 6P, NEMA 6P |
| Feature: Common Ethernet Protocol | No |
| Feature: PC Configurable | No |
| Indicator Type | LED |
| Warm-Up Time | 10 min |
| Ultrasonic Frequency | 300 kHz |